Products
biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be
0.22 µm Sterile Filtration 13 mm 10 mL (< 50 µL) HDPE, EO CE 100 units/pk SLMPL25SS Millipore Express® PLUS (PES) Membrane Fast flow and low binding for cell culture media preparation 0.22 µm Sterile Filtration 25 mm 100 mL (<100 µL) PVC, EO CE
Hawach hydrophilic PTFE syringe filters clean small volumes for HPLC or GC applications. pore size: 0.22/0.45 um. Enter to get the best offer.
Filters made of nylon are of course still available, as nylon is still an excellent choice for tasks like straining and dissociating tissue in tube-top strainers, as well as countless applications for nonsterile syringe filtration.
Available in various capacities from 150 mL to 1 L, with choice of membrane filter material: Cellulose Acetate (CA) with 0.22 or 0.45 µm pore size; Cellulose Nitrate (CN) or Nylon (NY) with 0.2 µm pore size; and Polyethersulfone (PES) with 0.22
PES filter membrane with pore size 0.45 µm for a pre-filtration. PES filter membrane with pore size 0.22 µm for sterilization. Membrane with a high flow rate with minimal protein binding. Standard Luer-lock connection enables a filtration at high pressure with a syringe. <100 µl dead volume.
study results indicated that Polyethersulfone (PES; 0.2 µm) was the best of the filters studied in terms of adsorption as well as retention of particulate matter. The mixed cellulose esters (0.22 µm) and polyvinylidene difluoride (0.22 & 0.45µm) filters significantly
2020/1/4 · A polyethersulfone (PES) filter (F6, 0.22 μm) gave the lowest losses of PFASs, followed by a recycled cellulose (RC) filter (F2, 0.45 μm). The good performance of filter F6 could be attributable to smaller syringe diameter. For methanol matrix, a polypropylene (PP) filter (F3) displayed the lowest sorption of PFASs.
Available with 6 membrane types of CA,PVDF, PES, MCE, Nylon and PTFE 2 membrane areas of 0.65 and 4.3 cm 2 3 pore sizes: 0.1, 0.22 and 0.45μm Quality tested for filter efficacy and housing integrity Low hold-up volume Gamma radiation
Millex MCE syringe filter is made up of hydrophilic mixed cellulose esters (MCE) membrane and is available in 0.22 µm, 0.45 µm and 0.80 µm pore sizes to suit your application needs. Housing of filter is made from a low-extractable polyvinylidene chloride (PVC).
The most common screen filter used in compounding is called a "membrane filter." In terms of structure, membrane filters are thin microporous sheets made from a variety of plastics. Membrane filters must have a nominal pore size of 0.22 microns or less if they are to be used for sterilization.
Sterlitech Corporation is both a manufacturer and a reseller of different membrane filters, so you will see 0.2 micron and 0.22 micron in our filter offerings; but for sterile filtering, both are suitable based on the above information.
0.22/0.45 PTFE (composite) Hydrophobic and hydrophilic High porosity and flow Best chemical and thermal resistance Consistant quality from roll to roll Hydrophobic: 0.22/0.45 Hydrophilic: 0.22/0.45/1.0 Supported: PET/PP PTFE (Unsupported) Hydrophobic and
Corning® 50 mL Tube Top Vacuum Filter System, 0.22 µm Pore 13.6cm² CA Membrane, Sterile, 12/Case Product Number 430320
0.2µm SYTG PTFE membrane syringe filter with pre-filter Available in 13mm, 25mm 0.45µm SYTF PTFE membrane syringe filter Available in 4mm, 13mm, 25mm 0.2µm SYTF PTFE membrane syringe filter Available in 4mm, 13mm, 25mm 0.45µm SYPP 0.2µm