Products
MilliporeSigma. sterile syringe filter with a 0.45 µm pore size hydrophilic PVDF membrane. Filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available Millex filters have a maximum housing pressure of 10.5 bar (150 psig), allowing you to filter solutions. Compare this item.
Captiva Premium Syringe Filters Premium Syringe Filters Membrane Diameter / Pore size 4 mm 15 mm 25 mm (* 28 mm) 0.2 µm 0.45 µm 0.2 µm 0.45 µm 0.2 µm 0.45 µm PTFE ♦ ♦ ♦ ♦ ♦ ♦ Nylon ♦ ♦ ♦ ♦ PES ♦ ♦ ♦ ♦ ♦ ♦ Regenerated Cellulose ♦ ♦ ♦ ♦ ♦ ♦ Cellulose Acetate ♦ ♦
Feb 17, 2020 · PVDF Hydrophilic Syringe Filters 0.22um or 0.45um Hydrophilic PVDF (Polyvinylidene Fluoride) is an optimal choice for protein-based samples with high non-specific binding, HPLC (High Performance Liquid Chromatography) and UHPLC (Ultra HPLC).
PerkinElmer. Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.
Tisch Scientific PTFE Syringe Filter, 0.45 µm, 25 mm, Luer-Lok/Luer Slip, Non-Sterile, 100 Pack, SF14469. Regular Price $114.09 Price $99.21 As low as $89.29. Add to Cart. Add to Wish List. Nylon Syringe Filters, 0.45 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF13828.
Mar 27, 2020 · Membrane filters must have a nominal pore size of 0.22 microns or less if they are to be used for sterilization. However, membrane filters are available in a wide range of pore sizes from 0.11 to 10 microns. Membrane filters are intended to filter a solution only as it is expelled from a syringe.
Details. High-quality Wyvern syringe filters are well-packaged and available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings. Membrane materials are supplied by the best names in the industry and the ISO9000
Media was spun at low-speed and supernatant (13mL total) was filtered (0.45 uM syringe filter) and spun in UC (using SW41Ti rotor x 25,000rpm, polyallomer UC tube) for 1 hour, 45 min. A very small
Jan 04, 2020 · Six syringe filters with different material composition and pore size were selected ().These were tested for the three selected matrices, i.e., MilliQ water (Millipore, Merck, Germany), DOC (10 mg L −1) water, and pure HPLC-grade methanol (LiChrosolv, Merck, Germany), which were spiked with a mixture of 21 PFASs with free concentrations ranging between 2 and 71 μg L −1 (except PFTeDA
We looked at durability, materials, designs, expert reviews, and customer ratings to find the best-performing syringe lab filters. The review includes detailed performance information and recommendations for your goals and budget. Find out which is best for you. 10 syringe lab filters: Editor Recommended #
A variety of membranes are available to meet your needs: Polyethersulfone (PES) – low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA) – lowest protein binding; polytetrafluorethylene (PTFE) – chemical resistance; regenerated cellulose (RC) – best choice for DMSO compatibility; Nylon (NY) – hydrophilic, surfactant-free, and lowest extractable. 100%
Details. High-quality Wyvern syringe filters are well-packaged and available in most of the major membrane materials including Nylon, PTFE, PES, MCE, PVDF, CA, PP, and GF which are supplied in 13mm, 17mm, 25mm and 30mm formats in virgin polypropylene housings. Membrane materials are supplied by the best names in the industry and the ISO9000
Nov 03, 2020 · 0.45um syringe filter which is also called a wheel filter because of its wheel-like shape is a disposable membrane based cartridge filter. Widely used in labs for quick and efficient filtering, material purification, and sterilization for solutions 250mL, it can be attached with a syringe and remove impurities in liquid solutions.
Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile, This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.