Products
These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size. Adding a syringe filtration step prior to chromatographic injection not only helps to ensure more consistent and reliable results, it also
The wwPTFE membrane is ideal for sample preparation and solvent filtration. Extend column life up to 52x Improve result quality with up to 24% less filter extractables and lower adsorption Use one membrane filter type for all your sample preparation applications
The Acrodisc PSF GxF syringe filter provides two to four times the throughput of standard prefilter devices. Moisture barrier for venting applications. Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in
PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
• For hard-to-filter samples where analytes of interest are inorganic ions • Pre-filter: Multilayer polypropylene • Diameter: 25 mm • Available pore sizes: 0.45 µm • Membrane materials available: Nylon, PES, PVDF, PP, PTFE HPLC/GC autosamplers Ordering
Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121 C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery.
A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack of 10. Millipore
philic filter membranes and competitor products. The purpose for using syringe filters for sample preparation prior to analysis is to protect analytical equipment and columns. Sartorius Minisart ® filters reliably remove particles from your samples without adding
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force
A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack of 10. Millipore
RephiQuik PES sterile filters are ideal for biological sample preparation, such as pharmaceutical and biological aqueous solutions filtration and protein/peptide related sample filtration. Compared with usual 25 mm syringe filters, 32 mm RephiQuik filters brings at least 20% more effective filtration area (4.4 cm2) while 20% lower hold-up volume (below 80µL)
RephiQuik Max PTFE This 32 mm RephiQuik Max composite syringe filter has progressive layers of glass fiber prefilters before the precision membrane for filtering hard-to-filter high particulate loaded or viscous samples. The filter combines 3 layers of filtration media in a compact pigment-free polypropylene housing, including two layers of ...
Syringe filters perform sample clean-up and preparation functions ensuring the purest samples are analyzed in liquid chromatography, mass spectrometry, and ion chromatography applications. Reliable results depend upon accurate data, achieved by the low extractables and high particulate retention of Pall Laboratory’s Acrodisc syringe filters.
Delta-10-Tetrahydrocannabinol (THC) Exo-Tetrahydrocannabinol (Exo-THC) Delta-9-Tetrahydrocannabinolic Acid A (THCA-A) Tetrahydrocannabibutol (THCB) Tetrahydrocannabivarin (THCV) Delta-9-Tetrahydrocannabivarinic Acid (THCVA)
Free ground shipping on Laboratory products for registered Credit Card users. Acrodisc Syringe Filter with wwPTFE Membrane - 0.2µm, 13 mm, minispike outlet (300/pkg) Share. Product image is a representative example for illustration purposes. Actual product may vary.