Products
The sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are
given that 0.45 µm syringe filters have been demonstrated to efficiently protect these type of columns [2], all the syringe filters used in this study had 0.45 µm membranes, and were 25 mm in diameter. Aijiren supplies Vials: Amber, write-on spot, 100/pk (p/n ) Vial caps: Blue, screw cap, 100/pk (p/n )
Sterlitech cellulose acetate syringe filters are hydrophilic membrane disc filters that are ideal for maximum sample recovery. These cellulose acetate membrane filters and cellulose acetate syringes are available as sterile or non-sterile and with or without a glass fiber pre-filter.
Sterile Spatula. of sample to container. Use to sample directly from production line or containers including bags and drums. 9" overall length, spatula dimension: 152mm (6") L x 19mm (3/4") W x 13mm (1/2") H 100 per box. V-shaped spatula is perfect for sampling granulated or semi solid material • Sterile .
Taipei Company . No. 22, Alley 7, Lane 270, Zhongping Road, Xinzhuang District , . New Taipei City TEL：886-2-29964887 FAX： 886-2-29965381. Lab Patrick@finetech-filter.com
Average filtration efficiency of Aijiren Captiva syringe filters compared to other suppliers. Note: Different latex-bead solutions were used for different membrane qualification tests. Impact of filtering a 0.3 µm latex-bead suspension on lifetime of a sub-2 μm column.
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
2.1 Total recoverable metals - The entire sample is acidified at the tim e of collection with nitric acid. At the time of analysis the sample is heated with acid and substantially reduced in volume. The digestate is filtered and diluted to volume, and is then ready for analysis. 2.2 Dissolved metals - The sample is filtered through a 0.45-µm
Item Syringeless Filter; Pore Size 0.45 um; Capacity 5mL; Filter Material Glass Microfiber; Housing Material Polypropylene; For Use With Sample Preparation, Difficult-to-Filter Samples, Quick Filtration of Samples, Pharmaceutical Samples, Content Uniformity, Drug Cleanup Prior to Injection During Dialysis in Animal Studies, HPLC Sample Preparation, Ion Chromatography, Layered Glass Microfiber
Filter membranes with a pore size of 0.45 µm are used for in-field sample preparation to investigate groundwater for dissolved heavy metals. Depending on the sample volume and the particulate load of suspended matter, so-called in-line filters can significantly streamline the sampling process, in contrast to the use of syringe filters.
SAMPLE PREPARATION: 5. Transfer the 13-mm glass fiber filter to a 4-mL vial. 6. Add 2 mL of acetonitrile to the vial and cap securely. 7. Place the sample vial into an ultrasonic bath and agitate for 10 min. 8. Filter the sample solution through a PTFE membrane filter. CALIBRATION AND QUALITY CONTROL: 9.
Endo NKS & E.Motion MF, 0,45 µm High Fl. Nutrient pad sets - dehydrated media pads in petri dishes , pre-sterilized, along with suitable membrane filters for economical, time-saving microbiological quality control. No other ready-to-use culture media assures such consistently high quality and reproducible results up to 24 months.
Jan 05, 2018 · Fluorescence microscopes, imaging systems, flow cytometers, and DNA sequencers all use a light source, such as a laser, LED, or broadband lamp, to excite the fluorescent tags within a sample. Fluorescence filters are used to isolate and direct the excitation signal to the sample and the emission signal to the detector or eyepiece ( Figure 1 ).
Ibis Scientific is the premier supplier and direct marketer of laboratory consumables and analytical lab supplies to analysts across North America. Based in Las Vegas, Nevada, we supply autosampler vials, closures and inserts, sample prep products, custom elemental standards, glassware, and tubing for analytical testing.
5. Filter a 10 mL portion of the sample through a 0.45 µm nylon syringe filter. 6. Using a volumetric pipet, transfer 5.0 mL of this filtered solution to a 100 mL volumetric flask. 7. Add approximately 15 mL of methanol to the flask. 8. Dilute to volume with Diluent and mix well. Blank Preparation: 1.