Products
Difference between hydrophilic and hydrophobic filters. Hydrophilic filters are easily wet with water. Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied
We carry syringe filters made of glass fiber, polypropylene (PP), polyethersulfone (PES), PVDF, polytetrafluoroethylene (PTFE), cellulose acetate, and more. HPLC Syringe Filters available in two sizes: 13 mm and 30 mm. Two pore sizes: 0.2 µm and 0.45 µm. Glass Fiber syringe filters available in 1.2 and 0.7 µm.
Syringe/Disc Filters The smaller conventional Corning® syringe disc-type filters (4, 15, 25, 26, and 28 mm diameter) are used with syringes which serves as both the fluid reservoir and the pressure source. They are 100% integrity tested. The HPLC-certified non-sterile syringe filters are available with nylon, regenerated
An Ultra Performance Liquid Chromatography (HPLC) system from Aijiren of series was used for the chromatographic separations. The separations were performed at a flow rate of 1.0 mL min-1 on Phenomenex Rex 301 column (150 mm × 4.6 mm, 5.0 µm). A binary gradient with a mobile
This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
At Chrom Tech, we will work with you and a variety of suppliers to ensure we've got Vials, Well Plates, and Syringe Filters on-hand. So you can focus on the work that matters. Save money on your chromatography vials without sacrificing quality. High quality polypropylene plates for high throughput applications.
Jul 10, 2019 · In this study, the new approach of dispersive micro-solid phase extraction using a magnetic sheet was developed. A circle magnetic sheet (diameter, 25 mm; thickness, 0.4 mm) was perforated and used as a support for fixing and re-collecting three-dimensional magnetic graphene nanoparticles as an adsorbent. The method was coupled with high-performance liquid chromatography-fluorescence detector
Sep 28, 2021 · LC-ESI-MS/MS data analysis was made with LabSolutions LCMS version 5.91 (Shimadzu) software. Then the diluted extract was filtered through 0.22 μm syringe filters before quantitative analysis using LC-ESI-MS/MS (Triple Quadrupole) with biphenyl column in LC system (2.1 mm × 100 mm inner diameter, 2.7 μm).
33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput. Higher Operating Pressure With a maximum housing pressure of 150 psig (10 bar) solutions can be filtered faster. Low Extractables, Low Binding A variety of membranes and housings ensure chemical
Feb 17, 2020 · A syringe filter (sometimes called a wheel filter for its wheel-like shape) is a single-use membrane based filter cartridge, to be attached with a syringe to remove impurities in liquid solutions. This pre-filtration step is vital in preventing damage to instruments (e.g. liquid chromatography, ICP, etc.).
1,887 33mm syringe filter products are offered for sale by suppliers on Alibaba.com, of which other lab supplies accounts for 13%, tracheal cannula accounts for 1%, and water treatment accounts for 1%. A wide variety of 33mm syringe filter options are available to you, such as injection & puncture instrument, medical materials & accessories.
0.22 μm syringe filter then 20 μL of solution was injected into HPLC for analysis. 2.3.2.6 Validation of the method Calibration standards were prepared using concentrations of 25, 50, 100 and 200 μg/mL of oxytetracycline. Drug spiked egg sample were prepared by adding appropriate amount of stock solution to two gram of blank egg sample to
February 2011, Volume 5, No.2 (Serial No.33) Journal of Agricultural Science and Technology, ISSN 1939-1250, USA Quantification and Comparison of Sugars, Carboxylic
The unique SolVac filter holder simplifies the clean-up and degassing of mobile phase solvents and other solutions. Featuring a versatile design that fits most HPLC bottles, flasks and containers, the SolVac filter holder eliminates added steps of washing flasks and transferring mobile phase solvents from flask to reservoir.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.