Products
The hydrophilic PTFE syringe filters show the least amount of extractables whereas the nylon syringe filters show very strong peaks between 4 – 6 min. On the other hand, the polypropylene membrane shows a broad peak between 4 – 7 min.
Oct 08, 2019 · Briefly, the syringe filters were conditioned (purged) thrice using 1 mL of LC-MS grade methanol (Merck, Darmstadt, Germany). The filtrates from each purge intervals (from the same filter) were collected and subjected to ultra-high performance liquid chromatography (UHPLC) conjugated with both a diode array detector (DAD) and a quadrupole time
Syringe filters are single-use filtration devices that are made up of a membrane, or combination of membranes, placed inside molded housing. The connections on the device are commonly Luer lock or Luer slip and enable a quick connection to syringes, that are used to pass the liquid sample through the filter.
Levofloxacin reference standard and sample preparation 0.025% of test and reference standard solutions of Levofloxacin were prepared in mobile phase, filtered by using 0.45µm millex syringe filter (Merck Millipore, Germany) before injecting. Twenty tablets were weighed individually, crushed into
Aijiren Captiva Premium PES syringe filters are evaluated and compared to other suppliers’ PES and PVDF syringe filters for the risk of losing protein during filtration. Captiva Premium PES syringe filters demonstrate low protein binding with excellent recovery for biological samples, especially for ‘sticky’ proteins at low concentrations.
Fig. 1A (light blue route) highlights the sample preparation procedure for the analysis of NDMA in Glucophage® formulation by GC–MS/MS. Approximately 250 mg powder were weighed into a 15 mL centrifuge tube. 10 mL of aqueous solution (LiChrosolv; Merck Millipore, Burlington, USA), containing NDEA-d4 (TRC, Toronto, Canada) internal standard at 2.5 ng/mL in water were added.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Sample Preparation • Phenex syringe filters utilize a filter membrane to remove particulates from your sample, and thus prevent particulates from entering the injector and the UHPLC column. Samples are easily pushed through the 0.20 µm filter membrane (recommended for UHPLC samples) with a syringe and then the collected filtered
Oct 29, 2021 · Sample preparation DCS precursor solution is obtained by dissolving about 0.2 to 1.2 wt% of DCS in 0.8 ml of commercial PMMA A2 ( M w = 495,000 Da, Spectrochem) resist and 0.2 ml of anhydrous anisole (99.7% pure; Sigma-Aldrich) that was sonicated for half an hour to ensure proper mixing.
The reference particles of the polymers PS, PE, PLA, PET, PA, and PP were analyzed using TD-Pyr-GC/MS: once without treatment (control) and once after applying the sample preparation method. The chromatograms of the TD and pyrograms were compared in order to detect possible changes for the untreated and treated polymers regarding the
Captiva Premium Syringe Filters Premium Syringe Filters Membrane Diameter / Pore size 4 mm 15 mm 25 mm (* 28 mm) 0.2 µm 0.45 µm 0.2 µm 0.45 µm 0.2 µm 0.45 µm PTFE ♦ ♦ ♦ ♦ ♦ ♦ Nylon ♦ ♦ ♦ ♦ PES ♦ ♦ ♦ ♦ ♦ ♦ Regenerated Cellulose ♦ ♦ ♦ ♦ ♦ ♦ Cellulose Acetate ♦ ♦
We offer Kinesis KX nonsterile syringe and membrane filters for use in sample preparation. These filters are ideal for use in all analytical and life science applications. Developed to meet the challenges of modern day applications, KX syringe filters and membrane filters provide reliable filtration for all types of aqueous, organic, and
Quality Check (QC) In-process integrity testing: Ensures that the product is made correctly and with a membrane fully sealed in the device. Vision testing for right placement of membrane. Pre-release testing: Provides customer with information which can impact application performance of a syringe filter. Flow rate / bubble point test.
Whatman™ provides a wide range of syringe filters, accessories, integrated devices and inline filter-degassers to address laboratory filtration needs from basic to the most demanding, for small research facilities to high-throughput analytic labs.
Millex ® syringe filters. Featuring reduced sample loss due to minimal hold-up volumes, Millex ® syringe filters are ideal for use in a variety of applications including HPLC sample preparation, the filtration of antibiotics and tissue culture additives, and dissolution testing. Our controlled manufacturing process ensures reliable filter