Products
Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm, 25mm (50/pkg, 200/cs) Product ID: 4225 Need this product with different specifications. Product Datasheets. Min Order Qty: 1. $ 858.92 / CV. Add to Cart. Add to Quote.
Description. Use Thermo Scientific™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering materials and fine particles down to the rated pore size.
Syringe Filter, PTFE, 0.22µm, 13mm Diameter Denville for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of sample and have a retention volume of only 28µL.
Acrodisc, Syringe Filter, PTFE, 25 mm, 0.45 µm, Non polar, 1000/case. Use the Acrodisc, Syringe Filter, PTFE for the extraction and filtration of aggressive solvents and organics. The lab equipment offers high-quality filtration for analytical samples and is certified for HPLC to ensure low extractables. Its housing material is hydrophobic
Acrodisc® One PSF Syringe Filter, 0.2µm wwPTFE Membrane, 25 mm (1000/pkg) Product ID AP-4912 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.2 mm µm nominal Alternate for AP-4566 Diameter (Metric) 25 mm Effective Filtration Area (Metric) 3.9 cm² Filter Media wwPTFE Hold-Up Volume <125 µL See All Attributes ACRODISC PSF w/ GXF/0.45µm wwPTFE 50/Pk
EZFlow® 13, 25, and 33 mm sample prep syringe filters are designed for organic solution samples. Sample prep syringe filters are used for clarification and particle removal from samples before instrumental analysis such as HPLC, IC, and GC. These syringe filters are available in a variety of filter membrane materials, in 0.2 or 0.45 µm pore sizes.
The positive pressure technique uses an appropriate syringe (with a male luer fitting) along with the correct size SPE cartridge connector. An electronically controlled or air-actuated positive pressure system can also be used to process either a well plate or multiple cartridges at once. C. Vacuum-Sidearm Flask
Specifications Membrane: HPLC certified PTFE, w/polypropylene support Maximum operating temperature: 110 °C Housing: Medical grade, virgin polypropylene Autoclave: Sterilize by dry heat at 121 °C for 15 minutes Applications HPLC and organic-solvent sample preparation and clean-up Dissolution sample analysis General sample preparation
Target2 PTFE Syringe Filters are used for general biological filtration. They are especially well-suited for applications where high protein recovery is desired. Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Target 2 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 17 mm, 100 Pk.
Whatman Puradisc H-PTFE syringe filters combine high quality with cost-efficiency. A true work-horse in the lab, these filters are well suited for rapid, routine syringe filtration in a busy, high volume lab. The H-PTFE membrane is suitable for HPLC and uHPLC sample preparation as well as many other applications, as its dual capability handles
PerkinElmer. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Choice PTFE Hydrophilic Syringe Filters 0.2 µm, 25 mm, 100 Pk. Disposable: Yes: Material: PTFE (Hydrophilic) Material (Membrane) PTFE (Hydrophilic) Pore Size: 0.2 μm: Sterility: Non-sterile: For Use With (Application) HPLC, SPE: Housing Material: Solvent Resistent, Low-Extractable Polypropylene: No. per Pack: 100: Prefilter: No: Pressure Rating: 90 psi: Product Line: Choice: Type
Feb 17, 2020 · A PTFE syringe filter is an ideal choice for filtering and de-gassing chromatography solvents. With proper pre-wetting (commonly used alcohol), aqueous samples are also compatible. When using air-vents, these syringe filters are capable of stopping moisture from passing through. Workable pH range: 1-14.
Adding a syringe filtration step prior to injection not only helps to ensure more consistent and reliable results; it also helps protect delicate instruments and prolongs column life.Available in sizes and membrane types to meet any application need, Thermo Scientific™ Titan3™ PTFE Hydrophobic Syringe Filters provide cleaner sample extracts by
Analytical testing labs across multiple industries need precision high-quality lab supplies and sample preparation products. Ibis Scientific markets and distributes the lab consumables and equipment needed to perform research at the highest levels, keeping labs well supplied and working. Our large inventory carries lab syringes, lab syringe