How to Choose Right 25mm Syringe Filter for HPLC

Note: The individually packed sterile syringe filter can be held in the original package to minimize contamination while attaching the syringe. Step 3: Secure the Syringe Filter Secure the syringe filter using a clockwise motion with luer-lock syringe.

Minisart® RC25 Syringe Filter 17764----------S, 0.2 µm Regenerated Cellulose. Minisart ® RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17764 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet.

First, choose from the outer diameter. There are 13mm and 25mm diameters. You can choose according to the size of the collection container. You can also choose according to the fineness of the filtration. Aijiren's syringe filter has two pore sizes, 0.22μm and

High Particulate Loads PP,GF, Filter with pre-filter Aggressive or Pure Organic Solvents Hydrophobic PTFE, PVDF Step2: choose the suitable diameter Volume of samples Recommend <10ml 13mm <100ml 25mm

Typically, the first step in selecting a suitable filter is to choose a membrane that is chemically compatible with the sample (see table below for a full selection of mebranes). For aqueous samples, it is preferable to use a hydrophilic membrane (wwPTFE, PVDF, or Nylon) versus a

Minisart® SRP25 Syringe Filter 17576----------K, 0.45 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17576 with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet.

25mm 0.45/0.22um MCE Strangthened Microporous Membrane Filter Membrane Disc MCE Strangthened Introduction MCE membrane filters are modified to offer researchers the lowest binding filters available. Due to the extremely low binding characteristics, these filters provide higher throughputs than competitive offerings and reduce filter changes when filtering proteinaceous solutions.

Filtration for most HPLC samples. Titan3 PTFE. (Hydrophobic) Target2 PTFE. (Hydrophobic) Choice PTFE. (Hydrophobic) Filtration of aggressive organic, highly basic, or hot solutions, transducer protectors. Filtering aqueous solutions after prewetting with an alcohol.

LabZhang 24pcs Syringe Filter,Syringe Lab Filters,Hydrophilic Nylon Membrane 25mm Diameter 0.22um Pore Size,Non Sterile Filtration,Green(nylon-25mm 0.22um) $12.99 Syringe Filters PTFE Membrane - Hydrophilic Filtration，0.22um Pore Size, 13mm Membrane Diameter, (Pack of 100)

1 Product Result. | Match Criteria: Description. SAMP2LCRB. This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.

26/8/2018 · LY-1010. PES Syringe filters with Luer Lock 25mm / 0.45um 100/pk. · PES syringe filters are specifically designed for clarification of aqueous and solvent samples in a wide array of analytical and research applications. · Luer Lock enables secure connections and eliminates filter

Syringe filters are popularly used in HPLC analysis. In cell culture hood syringe filters are normally used to sterilized a small amount of liquids, dissolved drugs, etc. Syringe filters are normally in conjunction with a syringe which uses pressure to push aqueous solutions through the filter to

25mm. Step 3: Choose the suitable pore size based on the nature of your sample. Removal of high particulate matter with a pre filter is critical before any drug, toxic, or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance. Generally, 0.45 μm porosity filters are used to remove particulates

25mm. Step 3: Choose the suitable pore size based on the nature of your sample. Removal of high particulate matter with a pre filter is critical before any drug, toxic, or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance.

25mm welded PTFE Hydrophilic syringe filter Material of housing : PP Effective filtration area (cm²) : 4.15cm² Pore size (um) : 0.22 / 0.45 Process volume(ml) : ＜100ml Maximum Operating Temperature : 130 Maximum Operating Pressure(psi) : 87psi