Products
Filter the solution into the receiving bottle by slowly pressing down the syringe plunger to push the sample through the filter. Note: Avoid pressing excessively as this could cause the filter housing to burst.
Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of sample and.
Sample Preparation & Filtration SKU: WAT200831 Acrodisc, Syringe Filter, Nylon, 25 mm, 0.45 µm, Aqueous, 1000/case Acrodisc, Syringe Filter | 25 mm | 1000/case | WAT200831
Nylon Membranes have a good chemcial resistance and are commonly used for general laboratory filtration or filtration of HPLC samples. Nylon Membranes may binds Proteins and other Macromolecules and should not be used when protein recovery is important. Good chemical resistance. General laboratory filtration. Membrane Chemical Compatibility Chart.
Filter Diameter: Syringe filter diameter depends upon the volume of the sample to be filtered. If the volume of the aqueous sample is Higher, the filter should be with a larger diameter. Syringe filters are available in a variety of diameters including 4mm, 13mm,
Quality Nylon, PTFE, PES, PVDF and MCE syringe filters & membrane filters for sample preparation
Typically, the first step in selecting a suitable filter is to choose a membrane that is chemically compatible with the sample (see table below for a full selection of mebranes). For aqueous samples, it is preferable to use a hydrophilic membrane (wwPTFE, PVDF, or Nylon) versus a
Thermo Scientific 750µl Nonsterile Centrifugal Filters, Nylon, 0.20µm, pk.100 Thomson SINGLE StEP Filter Vial with Pre-Slit Cap, Nylon 0.2µm, 1 x pk.100 $ 227.00
Volume of samples. <10ml. <100ml. 13mm. 25mm. Step 3: Choose the suitable pore size based on the nature of your sample. Removal of high particulate matter with a glass fiber pre filter is critical before any drug, toxic, or dirty environmental sample is filtered to ensure the highest syringe filter
preparation and reduces labor by simultaneously filtering up to 24 samples: Designed for use with Waters’ Alliance s HPLC systems. E l im nat esh dfo rv u y-w p g . System is economical and requires less bench space compared to the traditional syringe filter
Syringe Filter, Nylon, 0.22µm, 13mm Diameter. Denville. around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL.
Thermo Scientific Titan3, Target2, and Choice SyringeFilters remove interfering materials, fine particles, and microorganisms, providing you with cleaner sample extracts. These high-quality robust sample filtration solutions are available in a variety of syringe filter sizes, membranes, and housings for a wide range of samples and applications.
Flyer. Sartorius Minisart® with a Polypropylene (PP) Housing are available in a choice of different membranes: Hydrophilic regenerated cellulose (RC), Nylon (PA) or Hydrophobic PTFE. The purpose of using them for sample preparation prior to analysis protect analytical equipment and columns. The Sartorius Minisart® filters remove particles from your
Syringe Filter, Nylon, 0.22µm, 13mm Diameter. Denville Scientific Syringe Filters are constructed so that the sample must pass through the membrane, not leak around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition.