Products
Sample filtration. Syringe filters; Filtration cartridges; Filtration multi 96-well plates; 0.45 µm 1 µm 1 µm / 0.2 µm 1 µm / 0.45 µm 1.2 µm 5 µm
Two porosites are available: 0.45 micron pores and 0.20 micron pores. Use the 0.45 micron version to remove particles that are detrimental to most columns; the 0.20 micron filters are used to remove the smallest particles. Pre-filters have a 100% borosilicate glass fiber membrane that is chemically inert and resistant to most solvents. The high
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.
Holding the filter device in one hand and the filled syringe in the other, secure (without excessive force) the filled syringe to the filter device with a twisting motion. Apply gentle pressure to begin filtration.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Jun 26, 2014 · However, the discovery of Brevundimonas diminuta, showed that there were still bacteria capable of passing through a 0.45 micron filter in large quantities. After the discovery, researchers and labs competed to create the new filtration standard, arbitrarily defining their filters to be either 0.2 or 0.22 micron in pore size, roughly half the
Filter materials can also break off or come loose during filtration and appear in the filtrate. Depth filters are rigid enough to filter a solution being pulled into a syringe. They can also be used to filter a solution being pushed out of a syringe. But the same filter cannot be used to draw up and then expel a solution.
The effective filtration area of 6.2 cm2 for fastest filtration is the biggest amongst premium syringe filters. Minisart ® with acrylic-based housing can be sterilized by ethylene oxide (EO) or gamma irradiation and are suitable for adhesive attachment and assembly to tubing making it easily user configurable to almost any setup.
Available in 0.2, 0.45, 0.8, 1.2, and 5 µm pore sizes; Color-coded housings allow easy identification of pore size and membrane; Easy to use. Double luer-lock design offers safe and secure needle placement; PharmAssure 25 mm Vent Filters Protects patients and health care professionals with sterile hydrophobic barrier. Easy to use.
Our Minisart ® filters with a housing made of acrylic (MBS) are the perfect choice for sterile filtration and clarification of additives, buffers, reagents, drugs and gases. Sterilization by filtration is the fastest solution for bacterial cell removal. Ready-to-use pre-sterilized and single-packed units.
Syringe Filters Compatibility Chart R = Recommended. No significant change observed in flow rate or bubble point of the membrane, nor visible indication of chemical attack. L = Limited Recommended Use. Moderate changes in physical properties. The filter may be suitable for short term, non-critical use. N = Not Recommended.
Clear PTFE (Hydrophobic) Syringe Filters, 0.45 µm, 4 mm (200/Pack) have broad chemical compatibility and high pH resistance. These are versatile filters for use with aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation. The pure polypropylene housings are.
Sep 28, 2016 · Syringe filters normally use membrane type filters which have a specific particle size cut off (e.g. 0.45 μm). Syringe filters are also available for the filtration of gases and for the removal of bacteria from a sample. They are also used in illicit drug harm reduction (although not in the lab please!) [1] The questions I ask here are:
Millex-GP filters are recommended for sterile filtering protein solutions, tissue culture media, buffers and additives. - Millex filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available. Use them to filter protein solutions. The 0.2 µm filters are sterilizing grade.
How to use a Syringe Filter for embryo handling. This syringe filter has a low protein binding membrane to maximize recovery of critical components. Gamma