Products
Filtration with syringe filter To remove particles and microorganisms The sample can be injected into the system ÄKTA™ start system How do customers typically proceed? Protein Prep syringe filter for ÄKTA systems • 13 mm or 30 mm diameter • 0.2 µm or 0.45 µm pore size Tips for choosing the right filter • Use 13 mm diameter filter
Eliminate particles and microorganisms from your sample — reliably. Prevent the accumulation of fine particles that can block your chromatography column. Thermo Scientific Titan3, Target2, and Choice SyringeFilters remove interfering materials, fine particles, and microorganisms, providing you with cleaner sample extracts.
Step 3: Choose the suitable pore size based on the nature of your sample ic, or dirty environmental sample is filtered to ensure the highest syringe filter membrane performance. and mobile phase solutions. For Sterile-filtration, a 0.20 μm porosity filter can be used. Bioyfil™ syringe filters design with a layer of prefilter. Ideal for
With the rapid pace of the pharmaceutical industry, sample preparation in drug screening and development is often automated. While this advance in technology saves time and resources, standard syringe filters often fail in automated systems due to high back pressure, filter misalignment, or filter jams due to shingling (Figure 1).
MS ® 4mm diameter syringe filter is specially designed for less-than-1ml sample filtration and features extra low hold-up volume (<10μl) to ensure maximal sample recovery. It consists of housing and membrane component. Housing is made of medical grade PP raw material. Membrane is available in Nylon, PTFE, PVDF and so on.
Use with: Heavily contaminated samples. Don’t use with: Benzyl alcohol. Sterilization: Syringe filters can be sterilized by autoclave at 125° for 15 minutes. Applications: Dissolution testing, filtration of high particulate samples, air filtration, recovery of DNA from biological samples.
Porvair supplies filters for Covid-19 testing. The company's Vyon porous plastic filters will be used in the SAMBA II machine that provides swift diagnosis of Covid-19 infection.
use 10 mM NaCl or KCl water to achieve the best results. NOTE: In order to make 10 mM of NaCl solution dissolve 0.5844 g NaCl into 1 L DI filtered water In order to make 10 mM of KCl solution dissolve 0.7455 g in 1 L filtered DI water Many biological samples are measured in phosphate buffered saline (PBS) to match the osmolarity and ion
syringe filters. Features • 13 mm and 25 mm diameter syringe filters • 13 mm filters are recommended for samples up to 10 ml, and 25 mm filters for samples greater than 10 ml (however, the volume of sample that can be filtered through each filter depends on the characteristics of the sample) •
using an automated process. Sterile devices are provided with a Certificate of Quality. Faster Flow Rate 33 mm Millex filters have 20% more filter surface than 25 mm filters for significantly higher flow rate and throughput. Higher Operating Pressure With a maximum housing pressure of 150 psig (10 bar) solutions can be filtered faster.
Specifically designed for use in W orkst ation for automated sample preparation. Offers all the special features of mdi Nylon-66 syringe filters. Cellulose Acet ate Syringe Filters SY4CA, SY13CA, and SY25CA Syringe filters with low protein binding Cellulose Acetate membrane are specially designed for protein samples. 4 Specifications
philic filter membranes and competitor products. The purpose for using syringe filters for sample preparation prior to analysis is to protect analytical equipment and columns. Sartorius Minisart ® filters reliably remove particles from your samples without adding unwanted extractables or leachables (see comparison of different filter membrane
The purpose of using syringe filters for sample prepara-tion prior to analysis is to protect analytical equipment and columns. Sartorius Minisart® PP filters reliably remove particles from your samples without adding unwanted extractables or leachables. HPLC certified HPLC Procedure Column C18: 250 × 4.6 mm, Flow Rate: 1 ml/min, Wavelength: 210 nm
Ideal for use with bioreactors and fermenters. Have broad chemical resistance. For use with sample volumes of 2-100ml. Their enhanced luer-lok inlet provides secure connections and eliminates. Each manufacturing lot is tested for burst pressure of housing, bubble point, and flow rate performance.
3 33 mm Nylon Nylon with GF prefilter Nylon Hydrophilic PTFE Acetonitrile Blank 0.2 0.15 0.1 0.05 0 0 2 4 6 8 10 Time, minutes Absorbance @ 214nm, mAU 12 14 16 18 20 0.05 Acetonitrile Sample Preparation for Chromatography Non-sterile, low-extractable filters for clarification or fine particulate removal prior to instrument analysis.