Products
One of the major applications for the PTFE membrane is the clarification of corrosives, solvents, and aggressive fluids. This includes the important requirement in HPLC analysis for sample filtration where any solid particles can cause permanent damage to the column. The 0.5 µm pore size is normally used.
CHM® SCA syringe filters are designed for the quick and efficient filtration up to 100 ml of liquid. Ready-to-use units, offer high flow rates at low inlet pressures, presented in 5 pore sizes: 0.2, 0.45, 0.8, 1.2 and 5 µm and in 2 diameters; 13 and 25 mm, to fulfil your filtration requirements for clarifying/ultra cleaning.
2) Secure the filled syringe to the FLL inlet of the syringe filter with a twisting motion. 3) With the outlet pointed upward, gradually apply thumb pressure to the syringe plunger to initiate flow. 4) Continue thumb pressure until all the air in the device is displaced 5)
High Throughput Filtration. Sartorius Minisart® syringe filters are the No. 1 choice for sterile filtration, analytical sample preparation, and clarification of media additives, buffers, chemical reagents, drugs and even gases! Innovative design features, coupled with the largest surface areas and fastest flow rates make Minisart® syringe filters
Preparation of Filters Membrane filters of CE are placed on clean microscope slides and left to a short burst of acetone vapor. Then the filter is cleared by collapsing the filter structure. A drop or two of triacetin is applied to the filter surface, and a cover slip is
Syringe Filter, 0.2 um Pore Size, PTFE Filter Material, Up to 100mL Capacity Item # 32HK68 Mfr. Model # 6784-2502 For Use With HPLC Aqueous Sample Preparation, Biological Sample Preparation, Buffer Solutions, Salt Solutions, Tissue Culture Media ...
28/9/2016 · This is the most basic method of using a syringe filter. Load the sample into the syringe. Attach the filter securely with a twisting motion. With a luer slip syringe, this is about one quarter turn as the filter is pushed on. If the syringe has a luer lock (as in this
Hydrophilic filters can be wetted with virtually any liquid, and are the preferred filters for aqueous solutions, as appropriate by compatibility. Once wetted, hydrophilic filters do not allow the free passage of gases until the applied pressure exceeds the bubble
Sample preparation for the analysis of drug products involves dissolving formulations in solutes or media, followed by sample centrifugation or filtration, and then injection into an analytical instrument, usually HPLC. The purpose of sample centrifugation or filtration
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force
The PTFE syringe filters have a low hold-up volume. It means that the sample recovery is maximized with these filters. When buying these filters, you should check its retention volume. Compatibility: These filters are compatible with most of the chemical
PTFE membranes are used for liquid clarification of corrosives, solvents, and aggressive fluids. Effective sample filtration is critical to prevent equipment damage. Cytiva's PTFE hydrophobic membrane filters are also suitable for air and gas sterilization* because of their ability to capture aqueous aerosols.
Product Description. We are offering wide range of disposable syringe filters Nylon, PVDF, PTFE with luer lock connection, are a comprehensive range of non-sterile disposable syringe filters. Feature & Benefits of syringe filters13mm, 25mm Syringe filter• Wide sample Compatibility• Adhesive ‐ free seal eliminate potential sample contamination•
hydrophilic PTFE membrane and are HPLC-certified for low levels of UV-absorbing extractables. They provide the cleanest sample for HPLC analysis. • Durapore® (PVDF) filters combine fast flow with low protein binding. • Nylon filters provide broad chemical
These CHM Ready-to-use syringe filter units are designed to remove particles during general filtration. They are ideal for use in life science applications. Preparation of aqueous, biological or protein based solutions for chromatography analysis.