Products
Syringe filters are used in analytical chemistry applications to remove particulate contamination prior to analysis. Filtering a sample prior to sample injection into analytical instrumentation will help protect sensitive parts of the instrument from particulate build-up and reduce system downtime. Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from
syringe filters with 0.2 µm pore size, and Mini-UniPrep™ syringeless filters with 0.2 µm pore size. Bovine serum albumin (BSA) was selected as the typical protein. A 5 mg/mL stock was prepared in PBS buffer, pH 7.4, then prefiltered using a SPARTAN 30 mm, 0.2 µm syringe filter. The stock was diluted with PBS to
Analytical lab supplies and chemicals for Food, Pharma, Toxicology and Environmental testing labs.
Sartorius Minisart ® syringe filters are the No. 1 choice for analytical sample preparation! Innovative design features, coupled with the largest surface areas and fastest flow rates make Minisart ® syringe filters the ideal choice for all your syringe filtration needs during the process of Cannabis product analysis.
PTFE Hydrophilic Syringe Filters, 0.45 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF17168. Regular Price $119.55 Price $103.95 As low as $93.56. Add to Cart. Add to Wish List. PTFE Syringe Filters, 0.45 um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14467.
Filters are essential in research laboratories and many other industries for removing particulates and creating environments conducive to a wide array of experiments and procedures. The devices come in different forms including in-line filters, paper discs, small capsules, and large ventilation panels.
Improve signal-to-noise ratios, maintain clean baselines and maximize instrument uptime with trusted Millex® syringe filters. With low extractables and low analyte-binding membranes, Millex® syringe filters are the most convenient, highest-quality syringe filters for sensitive instrumental analyses, including gas, liquid, and ion chromatography. Wide chemical compatibility enables their use with virtually any sample composition.
Whatman SPARTAN syringe filters from Cytiva provide reproducible filtration for ultra-high performance liquid chromatography (UHPLC) and high performance liquid chromatography (HPLC) sample preparation and analysis. Excellent chemical resistance to common aqueous and organic solvents, so recommended for HPLC method sample preparation.
SPARTAN syringe filters with 0.2 and 0.45 µm pore sizes, 25 mm diameter Whatman GD/X™ syringe filters with 0.2 µm pore size, and Mini-UniPrep™ syringeless filters with 0.2 µm pore size. Bovine serum albumin (BSA) was selected as the typical protein. A 5 mg/mL stock was
Setting the standard in small-volume filtration (1-200 mL), the unsurpassed consistency of Millex ® syringe filters in sample preparation has led to the development of many methods specifying their use. Featuring reduced sample loss due to minimal hold-up volumes, Millex ® syringe filters are ideal for use in a variety of applications including:
Fill the syringe with the liquid sample and allow a small volume of air to enter the Syringe. This small volume of air is used as a purge to minimize fluid retention when expelling the liquid sample from the syringe. Assembly. Twist the SiliCycle Syringe Filter Luer-Lok™ onto the syringe.
of solution). There must be no suspended solids (if in doubt filter a portion with 0.2 micron cellulose nitrate syringe filter). x The minimum sample volume is 5mls, but if quantitation procedure uses an internal standard there are difficulties adding an internal standard accurately and reproducibly to such a small volume.
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered.
Puradisc 13 mm Polytetrafluoroethylene Syringe Filter, 0.45 µm, nonsterile (100 pcs) Eight different material options. Choice of 4 mm, 13 mm, and 30 mm syringe filter diameter to suit sample volume. Range of pore sizes for retaining a variety of particles. Optional sterile, medical-grade blister pack.
Protein Prep Syringe Filters for ÄKTA systems is designed for optimal preparation of protein samples prior to chromatography. High yield protein purification and accurate protein analysis both depend on a quality sample being introduced to the chromatography column.