Products
Identifying the filter material most suitable for your application based upon the nature of the liquid or gas you are filtering will ensure the best performance of your filter. Each syringe filter contains a membrane filter of a set diameter and plastic housing with luer connections used for connecting to syringes (or in-line hosing systems).
Simplify sample preparation with the Whatman™ regenerated cellulose membrane portfolio from GE Healthcare • Reduce cost with well-designed devices – the regenerated cellulose (RC) family includes products for robotic sample handing, outside-of-lab sample preparation, certified method development, and working with hard-to-filter samples.
Identifying the filter material most suitable for your application based upon the nature of the liquid or gas you are filtering will ensure the best performance of your filter. Each syringe filter contains a membrane filter of a set diameter and plastic housing with luer connections used for connecting to syringes (or in-line hosing systems).
Stock for this item is limited, but may be available in a warehouse close to you. Please make sure that you are logged in to the site so that available stock can be displayed. If the is still displayed and you need assistance, please call us on 0800 22 33 44.
Housings. • Titan3™ filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. • Solutions at temperatures up to 100°C can be f ltered using Titan3™ syringe filters. • Syringe filters can be sterilized by autoclave at 125
sample. The extracted sample was spiked using Shimadzu’s 11-part cannabinoid mix (220-91239-21) to a concentration of 10ppm with a final volume of 100mL. 1mL of the spiked sample was segregated as the spiked unfiltered sample. 1 mL volumes of sample were filtered separately through each of the syringe filers in replicates of ten. The
Millex ® syringe filters. Featuring reduced sample loss due to minimal hold-up volumes, Millex ® syringe filters are ideal for use in a variety of applications including HPLC sample preparation, the filtration of antibiotics and tissue culture additives, and dissolution testing.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Syringe filters, Acrodisc® ion chromatography (IC) Supplier: Pall Laboratory. Description: Optimised to provide the most consistent results when analysing ionic species. Certified for low level extractables detected by conductivity. ,514-4040EA,514-4021EA,516-7714EA,514-0187EA,516-7705EA,516-7704EA,516-7712EA.
Tisch Scientific offers an extensive selection of proven, yet affordable syringe filters that are in stock and ready to ship today. Selected for their durability, material quality and performance characteristics, our syringe filters deliver accurate, measurable results at a fraction of the cost.
Cytiva Whatman™ 13mm Puradisc™ Nonsterile PVDF Syringe Filters Designed for high tensile strength, high solvent resistance, and low protein binding. Whatman™ 13mm Puradisc™ Nonsterile PVDF Syringe Filters are well-suited for biomedical filtration, sterilization filtration, and HPLC sample preparation.
Minisart® syringe filters optimized for sample preparation consist of a PP housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different
See below for stock. 13mm diameter syringe filters. Designed to provide high efficiency filtration and maximum sample recovery with a typical throughput of up to 10ml volume. PP housing. Available with a variety of membrane types. Different puradisc membranes are suitable for different sample types. Identifying the filter material most suitable
Housings. • Titan3™ filter housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices. • Solutions at temperatures up to 100°C can be f ltered using Titan3™ syringe filters. • Syringe filters can be sterilized by autoclave at 125
PTFE Syringe Filters, Acrodisc® Syringe Filters with PTFE Membrane - 0.2 µm (1000/pkg)PTFE Syringe FiltersNon-Sterile Syringe Filters