Products
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases
13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on
However, they are not recommended for the filtration of acetone, DMF, DMSO, or strong bases. 13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on chromatograms, ensuring both accurate and reliable results.
25 mm: <100 mL Typical Hold-Up Volume 13 mm: <30 μL 25 mm: <100 µL Maximum Operating Temperature 55 ºC Ordering Information Part Number Description Pkg 6054524 ValuPrep 13 mm PTFE 0.45 μm 1000/pk 6054523 ValuPrep 13 mm PTFE 0.2 μm 1000/pk 6054511 ValuPrep 13 mm PVDF 0.45 μm 1000/pk 6054510 ValuPrep 13 mm PVDF 0.2 μm 1000/pk
Feature: filter diameter: 13mm, pore size: 0.22um, membrane material: nylon , hydrophilic property , no need to moist beforehand, uniform aperture , strong tenacity and adsorb ability, syringe filters for cell culture provide effective filtration for a wide variety of sample types designed with a female luer-lok inlet and male luer-slip outlets
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm.
Globe Scientific Sterile Syringe Filters With 13mm PVDF membrane for sterilizing buffers and media PVDF offers good resistance to solvents that exhibit low levels of UV adsorbing extractables and has broad chemical compatibility. PVDF syringe filters are ideal for HPLC sample filtration and general biological filtration- Lab Supplies - Stellar Scientific
Millex-GV Filter, 0.22 µm, PVDF, 13 mm, ethylene oxide A 13 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100.
1. Diameter: 13mm 2.Membrane: PTFE, PVDF, PES, MCE, NYLON, PP, CA, etc. 3.Pore Size: 0.22um / 0.45um 4.House Material: PP 5. Sample volume: 10ml 6. Filter area: 0.85cm2 7. Dead volume: 30ul 8. sterile type provi
These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered.
Whatman ® Glass Microfiber Membrane Holder, Stainless Steel Syringe Filter Type, Diam. 13 mm, Used for general laboratory microfiltration, quality control and sterility testing, removal of particulates from HPLC solvents and tissue culture media filtration. Manufacture: Whatman. Model: WHA1980001. Category: Labwares. Regulatory Status: For
Lab Safety Supply disposable, nonsterile nylon/polyamide filtration media syringe filters feature Luer-Lok™ and pressure fittings. They are ultrasonically bonded for reliability, and the filter media type is clearly inscribed on barrel. they offer excellent unit-to-unit and lot-to-lot reproducibility and consistency.
Nylon syringe filters are made of nylon membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Part No. Description. FN1322. 13mm Nylon Syringe Filter 0.22um, Green, 100pcs/pk. FN1345. 13mm Nylon Syringe Filter 0.45um, Green, 100pcs/pk. FN2522.
Re-usable Polycarbonate Syringe Filter Holders, 13 mm. This polycarbonate filter holder has been designed for the use of 13 mm filters for the filtration of aqueous solutions. Added to Shopping Cart. Item no.: 16514----------E. Price: $100.00. 12 Pieces. Add to Cart. Request a Quote.
cellulose acetate (CA) syringe filters are made of cellulose acetate (CA) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Part No. Description. FC1322. 13mm Cellulose Acetate Syringe Filter 0.22um, Orange, 100pcs/pk. FC1345.