Products
Syringe filters ROTILABO ® Nylon For the filtration of HPLC and GC solvents and for purification and sterile filtration of aqueous, alkaline and organic solutions. Hydrophilic, resistant to many solvents.
Nylon Syringe Filters, 0.22um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack
This 33 mm syringe filter with a Hydrophilic Nylon membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.2 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.
An internal ring provides more strength to the housing which prevents leakage and bursting. Titan3 Syringe Filters are packed in re-usable rigid transparent and color-coded containers. Titan3 Nylon Syringe Filter 1.5 µm, 30 mm, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520.
Non-Sterile Millex® Syringe Filters with Nylon Membrane: - Non-sterile Millex® syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents. - Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs. - Compatible with both aqueous and organic solutions, providing broad
Non-sterile Millex ® syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents, making them ideal for sample filtration of most aqueous and organic solvents across the laboratory. Syringe filters are available in two pore sizes and three diameters to optimize results. The housing is made from polypropylene
Nov 22, 2021 · Press Release Global Nylon Filter Market 2021 - Key Drivers by Manufacturers, Opportunities and Challenges Forecast to 2027 Published: Nov. 22, 2021 at 1:26 a.m. ET
Syringe filters CAMEO™ Nylon, 0,45 µm, 30 mm, Non-sterile Art. No. A069.2 €77.50 / 50 unit(s)
Target Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Color. Transparent Green. Description. Target2 Nylon Syringe Filter 0.45 µm, 4 mm, with Pre-Filter, 100 Pk. Diameter (Metric) 30 mm. Diameter (Metric) Membrane. 4 mm.
Because of their low inherent levels of extractables, nylon membrane syringe filters are commonly used to filter samples that are intended for HPLC analysis. Nylon membrane syringe filters may not be suitable for all samples and are ideal for near neutral pH aqueous solutions and compatible nonaqueous solvents.
This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520.
Oct 07, 2021 · Oct 07, 2021 (The Expresswire) -- Increase In Demand : From 173.7 million USD In 2020, The "Nylon Filter Market" 2021 will register a 3.1% CAGR in terms of
Millex Syringe Filter, Nylon, HPF, Non-sterile: Background Information: Overview of Non-Sterile Millex® HPF Syringe Filters • HPF Millex includes two different media: a graduated glass fiber prefilter (10.0 to 0.7 µm) to remove larger particles and an 0.20 or 0.45 µm membrane filter for fine filtration
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Overview of Non-Sterile Millex® Syringe Filters with Nylon Membrane: • Non-sterile Millex® syringe filters with hydrophilic nylon membrane are compatible with a broad range of solvents. • Available in 0.20 µm and 0.45 µm pore sizes and two diameters to suit your application needs. • Compatible with both aqueous and organic solutions