Products
Syringe Filter for Lab Solution Sample Syringe filters are usually used in laboratory because they are small and user-friendly. Syringe filters can be used for samples pre-filtration, clarification,removing of particulate matter and fluid and gas sterilization and so on .
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives.
Premium PES syringe filter with PVDF syringe filters for different proteins at 0.5 mg/mL. D: Dimer, M: Monomer. Figure 3. Filtration recovery comparison of the Aijiren Captiva Premium PES syringe filter with PVDF syringe filters for myoglobin samples at different concentrations. D: Dimer, M: Monomer. 0 20 40 60 80 100 120
10PCS PES Syringe Filters 0.22μm PORE SIZE 25MM Non-sterilized Pre-Filtration. 10P Syringe Filter Sterile PES Hydrophilic Filtration 33mm Dia:0.22um Individual. 10-100xPTFE Syringe Filter Disposable For Laboratory Use 0.45μm 25mm,Hydrophobic.
Filtration of Aqueous & Organic Solutions When you need to remove or collect contaminants from aqueous or organic solutions, our various membrane types including PES, Nylon, MCE, PVDF, PTFE, pore sizes ranging from 0.04 µm to 10 µm, constructions could meet your requirements.
A variety of membranes are available to meet your needs: Polyethersulfone (PES) – low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA) – lowest protein binding; polytetrafluorethylene (PTFE) – chemical resistance; regenerated cellulose (RC) – best choice for DMSO compatibility; Nylon (NY) – hydrophilic, surfactant-free, and lowest extractable. 100%
The sterile syringe filter provided by Aijiren has a cellulose acetate or PES filter membrane. A sterile membrane with a pore size of 0.2um is an ideal material for sterilization and filtration, while a pore size of 0.45¦Ìm can be used for clarification.
Introduction. MS® PES syringe filters are purpose-built with features designed to bring the highest levels of performance and purity to your research. We incorporate a variety of membranes to offer separation and purification solutions for the majority of your laboratory needs. PES (Polyethersulfone) – low affinity for proteins and extractable with substantially faster flow rates than PVDF; suitable for pre-filtration and filtration of buffers and culture media.
Syringe Filter Sterile PTFE PES PVDF Disposable Nylon 0.22um 13mm 25mm Medical Level Polypropylene Syringe Filter-ic-2 1box NYL $5.00-$10.00 / Piece 100.0 Pieces (Min. Order)
PES (Polyethersulfone) membrane is hydrophilic and constructed from Polyethersulfone polymer membrane. It is designed to remove particulates during general filtration, and its low protein and drug binding characteristics make it ideally suited for life science application. PES Memmbrane Filter.pdf
Syringe filters are broadly used in life science laboratories for sterilization of small volume samples, such as protein, culture medium, additives, buffers, reagents, and drugs. PES Syringe Filter Diameter: 13mm, 25mm, 30mm, 0.22um ,0.45um pore size can fast sterilization of buffers, culture media or other solutions
Sep 28, 2016 · The majority of syringe filters used do not allow you to reclaim the solid. They are often used before analysis to remove any solid, undissolved, material. Other, filter holder (in-line) types allow you to regain your filter (Figure 1). Syringe filters normally use membrane type filters which have a specific particle size cut off (e.g. 0.45 μm).
Pore size polypropylene syringe filter 50 mm . 50mm filter units are self-contained filter assembly for point-of-use filtration in digital printing systems. They have good pressure resistance up to 350KPa with filtration area of nearly 20cm2, offering high throughputs under low pressure drops.
Minisart® Syringe Filter, Polyethersulfone (PES), Pore Size 0.1 µm, Ethylene Oxide, Female Luer Lock, Male Luer Lock, Pack Size 50, by Sartorius. Minisart® High Flow with polyethersulfone (PES) is optimal for highest flow rates and a pH of 3 - 12. Type 16553 with a pore size of 0.1 µm can be used for sterile filtration and mycoplasma
The membrane material of the syringe filter is provided by the most famous people in the industry, and in the ISO9000 certified production process, under the certified clean room conditions, the latest manufacturing technology is used to ensure high-quality and stable products to achieve the highest standard. All syringe filters are HPLC certified.